RECOMMENDED FOR: Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master™ Plus XLPE CR
contains a monofilament helix for suction and crush resistant capability, as well as for routing hoses through tight bends.
Its Modified Cross–linked Polyethylene tube stock is best in class for maintaining a tight seal with stainless steel
fittings, and is designed for cleaning with open–end 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F
(+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are
building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for
proper hose selection.
CAUTION: For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744–5070. Chem
Master™ Plus XLPE CR is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is
dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744–5070 for any chemical
above +125°F (+52°C). Not recommended for closed steam cleaning.
TEMPERATURE: –40°F to +250°F (–40°C to +121°C) normal service.
CONSTRUCTION: Tube: Type K (Gatron™ Modified Cross–linked Polyethylene.) Tan. High chemical resistance.

 Reinforcement: Synthetic, high tensile textile with monofilament helix and static wire providing crush and
kink–resistance.
Cover: Type P (EPDM). Black corrugated with orange stripe. Additional color covers available on special
order.
Design Factor: 4:1
COUPLINGS: Use 7, 8, or 49 for fluid temperatures to +125°F (+52°C). Use permanent fittings only 71 or 73 for fluid temperatures
above +125°F (+52°C) and up to +250°F (+121°C) or 80 Gates GSP (2" only). Reference the Hose Coupling Section

推荐用途：用于一系列化学品转运的罐式车，驳船，储存罐。Mustang通过一层钢丝螺旋来满足完全的吸入要求，以及小弯曲半径的布线要求。

其交叉结合的改性聚乙烯内胶是目前最好的可保证与不锈钢接头“无缝”连接的材料。其设计保证其在“开式”50psi蒸汽下或者10%(NaOH)100°C

的喷淋下的清洗。必须使用在位清洁（CIP）方式。不推荐用于“闭式蒸汽”清洗。可用于超过950种基础化学物质，这些物质是很多工业领域合

成数量众多的化学品的基体。请参照盖茨化学介质兼容性表确定的软管选型。

注意事项：如需用于含超过90%硫酸的应用，请联系当地盖茨业务代表。

温度：常规应用下-40°C~+121°C.尽量Mustang是按照使用温度+121°C精心设计的，但是具体的可使用温度还取决于输送的化学介质。用于任

何高于+52°C的化学物质，请联系当地盖茨业务代表。

内胶层：K型鞣革，强耐化学腐蚀。

增强层：合成高强度棉线编织及钢丝螺旋。

外胶层：P型，黑色或绿色波纹状外表上有橙色螺旋色带。可根据定制提供蓝色，红色及黄色外胶。