产品中心

GATES LP350液化气软管丙烷丁烷软管CAN/CGA–8.1–M86. NFPA 58, Section 8–3.5.
产品详细PDF下载:

规格参数

  • 产品编号: 3220-1200 型号: 1/4
    内径 mm: 6 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3220-1201 型号: 1/4
    内径 mm: 6 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3220-1202 型号: 3/8
    内径 mm: 10 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3220-1203 型号: 3/8
    内径 mm: 10 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3220-1204 型号: 1/2
    内径 mm: 12 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3220-1205 型号: 1/2
    内径 mm: 12 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3220-1207 型号: 3/4
    内径 mm: 19 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3220-1208 型号: 3/4
    内径 mm: 19 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3220-1209 型号: 3/4
    内径 mm: 19 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3220-1206 型号: 3/4
    内径 mm: 19 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3220-1211 型号: 1
    内径 mm: 25 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3220-1212 型号: 1
    内径 mm: 25 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3220-1213 型号: 1
    内径 mm: 25 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3220-1216 型号: 1
    内径 mm: 25 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3220-1210 型号: 1
    内径 mm: 25 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3220-0855 型号: 1 1/4
    内径 mm: 32 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3320-0935 型号: 1 1/2
    内径 mm: 38 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3320-0939 型号: 2
    内径 mm: 51 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3320-0938 型号: 2
    内径 mm: 51 工作压力bar: 24
    价格 元/个: 型号 米/卷:
  • 产品编号: 3320-0934 型号: 3
    内径 mm: 76 工作压力bar: 24
    价格 元/个: 型号 米/卷:

产品简介

颜色:黑
温度:-40~+82
软管用途:

产品详情

RECOMMENDED FOR: Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to
exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local
building codes permit).
CAUTION: Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact
Denver Product Application (303) 744–5070 for inspection and assembly testing information.
TEMPERATURE: –40°F to +180°F (–40°C to +82°C) continuous service. Warning: Do not convey LP Gas over +140°F (60°C).
CONSTRUCTION: Tube: Type A (Chloroprene). Black. 1 1/2" – 3".
Type C (Nitrile). Black. 1/4" – 1 1/4".
Reinforcement: Braided, synthetic high tensile cord. 1 1/4" – 3".
High tensile synthetic textile cord. 1/4" – 1".
Cover: Type A (Chloroprene). Black. All sizes are perforated.
Design Factor: 5:1
COUPLINGS: 72 Gates Power Crimp® for 3/4", 1 1/2" and 2" I.D. or 75 Gates GLX® sizes 1/4" to 1 1/4". For Power Crimp® ferrules,
reference the Hose Coupling Section. Do not use male swivel, reusable or O–ring type couplings. For 3" I.D. use Dixon
LP Boss only.
STANDARDS: CAN/CGA–8.1–M86.
NFPA 58, Section 8–3.5.
Underwriters Laboratories Standard No. 21. (Applies to all sizes)

液态、气态丙烷,丁烷,或者两个混合。在开阔地或者通风好的情况可以输送压力低于3.5公斤的天然气。

不推荐用作家庭,办公室,天然气车辆燃气输送管。